Do you know the history of modeling clay in America? The cup, the jug or the plate what you use daily as pottery; they may be made of that. AMACO is the first American Company to manufacture the modeling clay in US and they provide it for the hobby of hand painted pottery, professional and classroom purpose. This is with zeal to keep alive a ancient product that is eco -friendly and beautiful. Do not forget to check out their low fire glazes, ceramic pottery kilns, and liquid glazes.With the technological advancement they have equipped themselves to address the demand of time. So, you can have from them non-hardening clays, air dry clays, modeling materials and casting compounds. They have developed full line of polymer clay tools; they are 14 bead rollers, pasta machine, polymer clay and craft oven besides for hobby; Art Emboss metal sheets and WireForm wire mesh that helps in memory making , three-dimensional crafts and sculpting.
Wares can be constructed by hand from coils of clay, from flat slabs of clay, from solid balls of clay. Parts of hand-built vessels are often joined together with the aid of slurry or slip, a runny mixture of clay and water. Handbuilding is slower and more gradual than wheel-throwing, but it offers the potter a high degree of control over the size and shape of wares ceramic pottery. While it isn’t difficult for an experienced potter to make identical pieces of hand painted pottery, the speed and repetitiveness of wheel-throwing is more suitable for making precisely matched sets of wares such as table wares. Some potters find handbuilding more conducive to fully using the imagination to create one-of-a-kind works of art, or as their source of inspiration.
Roller-head machines are used for shaping wares on a rotating mould, as in jiggering and jolleying, but with a rotary shaping tool replacing the fixed profile. The rotary shaping tool is a shallow cone having the same diameter as the ware being formed and shaped to the desired form of the back of the article being made. The roller-head machine is now used in factories world-wide. RAM pressing is a factory process for shaping table wares and decorative ware by pressing a bat of prepared clay body into a required shape between two porous moulding plates. Granulate pressing is the operation of shaping pottery by pressing clay in a semi-dry and granulated condition in a mould. The clay is pressed into the mould by a porous die through which water is pumped at high pressure. Granulate pressing, also known as dust pressing, is widely used in the manufacture of ceramic tiles and, increasingly, of plates. Slipcasting is often used in the mass-production of ceramics and is ideally suited to the making of wares that cannot be formed by other methods of shaping.
The potter’s wheel is a ball of clay is placed in the center of a turntable, called the wheel-head, which the potter rotates with a stick, or with foot power, or with a variable speed electric motor. During the process of throwing the wheel rotates rapidly while the solid ball of soft clay is pressed, squeezed, and pulled gently upwards and outwards into a hollow shape. The first step, of pressing the rough ball of clay downward and inward into perfect rotational symmetry, is called centering the clay, a most important skill to master before the next steps. The potter’s wheel can be used for mass production, although it is often employed to make individual pieces. So now that you have a little bit of history, go have fun making your .
Article Source: http://EzineArticles.com/1486814